Erasing All Feature Settings - SBC 4000 User Manual

Erasing All Feature Settings

To erase all feature settings at
a particular telephone:
1
Press PROGRAM.
- The display will read "Program..."
2
Press the soft key under NEXT
repeatedly, until "Advanced Setting"
appears in the display, and then
press ENTER.
3
Press the soft key under NEXT until
"Erase Settings" appears in the dis-
play, and then press ENTER.
- The display will read "Feature
Settings."
4
Press the soft key under ERASE.
- The display will read "Erasing
Done!"
72
Additional Information
To erase all the feature settings stored at a par-
ticular station and return that telephone to its
original factory settings, follow these steps.
Note that when you erase all feature settings at
a particular station, you do not erase the memo-
ry dial or the shared directory dial numbers that
may be stored in this station. If you ever wish to
erase stored memory numbers, follow the
instructions on page 49.