Base Settings; Registering The Handset - Gigaset 3000 Comfort Operating Instructions Manual

Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-50-6Z19 3000co.fm

Base settings

Registering the handset

You can operate your handset at up to 4 base stations.
For information on registering at non-Siemens GAP base
stations, see the relevant base station operating instruc-
tions.
• To prepare the base station, see page 9.
• Enter the following in the handset within one minute:
Press the menu key.
Select
Open the supplementary menu.
Select
Enter the base station's system PIN
System PIN
(factory setting: 0000) and confirm.
Additional base settings
All other base settings begin as follows:
Press the menu key.
Select
Select the base and open the supplemen-
tary menu.
Select the required function:
You can change the base name, e.g.
this case, "3" is the handset's internal number.
Select
(Change Base Name).
Enter the required name.
Name
For information on entering the name,
see page 14.
Select
18.05.00
.
.
.
to ; in
.
23