Driving - Yamaha Vector RS90GTA Owner's Manual

ESU11394

Driving

EWS00300
WARNING
Be sure to read the "SAFETY INFORMA-
TION" section on page 6 and the "Riding
your snowmobile" section on page 50
carefully before operating the snowmo-
bile.
TIP
Make sure that the engine is warmed up
enough before riding.
EWS00310
WARNING
Make sure that the throttle lever is fully
G
released and the snowmobile is at a full
stop before shifting.
Be sure to slide the shift lever to "FWD"
G
or "REV" until it stops completely and
only while the engine is idling.
Make sure that the area behind the
G
snowmobile is clear before reversing.
Watch behind.
Reduce speed and avoid sharp turning
G
when operating the snowmobile in re-
verse.
1. To select the desired operating position,
pull the shift lever out, slide it to "FWD" or
to "REV" until it stops, and then release it.
NOTICE: Do not shift from "FWD" to
"REV" or from "REV" to "FWD" while
the snowmobile is moving, as the
drive train could be damaged.
RS90GT / RS90LTGT / RST90GT
1. Pull out.
2. Slide to "FWD" (forward).
3. Release.
1. Pull out.
2. Slide to "REV" (reverse).
3. Release.
RST90
[ECS00811]
1. Pull out.
2. Slide to "FWD" (forward).
3. Release.
Operation
1
3
2
3
1
2
55