Multi-Function Meter Unit - Yamaha Vector RS90GTA Owner's Manual

RST90
1. Warning light "
2. Engine trouble warning indicator "
3. Two-digit code "84"
ESU14100

Multi-function meter unit

RS90GT / RS90LTGT / RST90GT
The multi-function meter unit is equipped with
the following:
a digital speedometer
G
a tachometer
G
an odometer
G
two tripmeters (which show the distance
G
traveled since they were last set to zero)
a fuel reserve tripmeter (which shows the
G
distance traveled since the fuel level warn-
ing indicator and warning light came on)
an oil change tripmeter (which shows the
G
distance traveled since the periodic oil
change interval was reached)
a clock
G
warning indicators (which show engine
G
trouble, coolant temperature, fuel level, and
oil level warnings)
indicator lights (which show high beam and
G
low coolant temperature conditions)
a warning light (which shows warnings to-
G
gether with the warning indicators)
a fuel meter (which shows the fuel remain-
G
ing in the fuel tank)
a grip/thumb warmer level indicator (which
G
shows the grip warmer level or the thumb
warmer level)
"
"
Control functions
a display brightness control function
G
When the key is turned to the on position, the
tachometer needle makes one sweep, and
the low coolant temperature indicator light,
the warning light, and all segments of the
meter unit display come on and go off.
1 2 3
1. "RESET" button
2. "SELECT" button
3. Tachometer
4. Warning indicators
5. Clock
6. Low coolant temperature indicator
light " "
7. High beam indicator light "
8. Warning light "
9. Meter display
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
TIP
To switch the speedometer, odometer, and
tripmeter displays between kilometers and
miles, select the odometer mode "ODO", and
then push the "SELECT" button for at least 10
seconds while the snowmobile is stopped.
4 5
FHI
E LO
"
"
6
7
8
9
13