Yamaha RX10RW Owner's Manual page 88

E_8fp.book Page 33 Tuesday, March 28, 2006 4:35 PM
5 6
Adjusting the drive track
WARNING
@
G Be sure to have a Yamaha dealer make this
adjustment.
G Support the snowmobile securely on a suitable
stand before working underneath the snowmo-
bile.
G
Operate the engine in a well-ventilated area.
@
1. Lift the rear of the snowmobile onto a suitable stand
to raise the drive track off the ground.
2. Loosen the rear axle nut 1.
3. Start the engine and rotate the drive track one or two
turns. Stop the engine.
4. Check the drive track alignment with the slide
runners 2. If the alignment is incorrect, align the
drive track by turning the left and right adjusters.
CD-08E
Drive track
5 Shifted to right
alignment
3 Left adjuster
Turn out
4 Right adjuster
7 Slide runners
8 Drive track
9 Slide metal
a Gap
b Forward
5. Adjust the drive track deflection to specification.
CD-09E
Drive track More than
deflection specified
3 Left adjuster
4 Right adjuster
8-33
6 Shifted to left
Turn in
Turn in Turn out
Less than
specified
Turn in Turn out
Turn in Turn out