Fuse Replacement; Battery - Yamaha SX230 Owner's/Operator's Manual

FUSE REPLACEMENT

The fuse is in the ignition coil holder. To
replace the fuse, unscrew the cap
and pull the two red leads out with
the fuse holder. Open the fuse hold-
er and replace the fuse.
➀
Ignition coil holder
➁
Cap
Accessory Fuse
2 2
➀
Fuse (20A)
➁
Battery switch
The fuse is on the red lead wire coming
from the battery switch. Open the
fuse box and replace the fuse.
3
4
➂
Fuse (10A)
4 Fuse holder
1 1
M
AINTENANCE
WARNING
Do not use fuses of higher amper-
age that
Substitution of a fuse of improper
rating can cause extensive electrical
system damage and possible fire.

BATTERY

NOTE: These general guidelines apply
to many commonly used battery types
(but not, for example, to maintenance-
free batteries). Consult the battery
manufacturer's instructions before per-
forming battery maintenance.
Check the level of the battery fluid and
see if the terminals are tight. Add dis-
tilled water if the fluid level is low.
CAUTION:
● Be careful not to place the bat-
tery on its side.
● Remove the battery from the boat
before adding distilled water or
recharging.
4-15
& C
ARE
those recommended.
4