Yamaha SR230 Owner's/Operator's Manual page 55

Sport boat sr230
Hide thumbs Also See for SR230:
Table of Contents

Advertisement

Engine Compartment
BILGE BLOWER
Operate the bilge blower for at least 4
minutes before starting the engines.
Open engine hood and check to be
sure no gasoline vapors are present.
Check for fuel leaks or loose electrical
connections.
1
Blower motor
WARNING
Gasoline vapors can explode. Before
starting the engines, operate the
blower for at least 4 minutes and
check the engine compartment bilge
for gasoline vapors. Do not start the
engines if you can smell fuel vapors
in the engine compartment or if there
are any loose electrical connections.
Contact your dealer if there is a prob-
lem you cannot locate or correct.
Lights
LIGHTS
Check for proper operation of the bow,
stern, and instrument lights by pressing
the switch on the control panel.
If the stern light is not installed, remove
it from the storage area, lift the socket
cover, and install it into the socket to
check operation.
3-9
O
PERATION
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents