Advertisement
the operation of the vehicle (for
example, airbags) or disturb your
field of vision while driving.
Check that the deployment of the
airbag is not blocked or impaired
in any way.
Ensure that the mounting device
or mobile holder is not installed
where you might come in contact
with it in the event of an accident
or collision.
Periodically check that the suction
cup at the bottom of the mounting
Attach to a windscreen
Locate a safe mounting surface on
the windscreen, and clean the
surface thoroughly with a glass
cleaner and a clean towel. If the
ambient temperature is below
+15°C (60°F), carefully warm the
surface and the suction cup with a
4
device is firmly attached to the
windscreen, especially if the
ambient temperature changes a
lot.
Never leave the mounting device
inside the vehicle in direct
sunlight or in excessive heat. The
mounting device and suction cup
may be damaged and adhesion
may be impaired if the inside
temperature exceeds +70°C
(160°F).
hair dryer to ensure a firm grip on
the windscreen. Ensure that you
do not heat the windscreen
excessively to avoid damage to it.
Press the suction cup at the
bottom of the mounting device
firmly on the windscreen (see step
© 2008 Nokia. All rights reserved.
Advertisement
