12. Paper Jams
12.1.2 When the recording paper is not fed
into the unit properly
The display will show the following.
1
Pull the paper input tray until it clicks into place, then
pull it completely out, lifting the front part of the tray.
Remove the recording paper and straighten.
2
Re-load the recording paper.
3
Insert the paper input tray to the unit, lifting the front
part of the tray. Then push it completely into the unit.
Note:
L If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 18 for details.
86
CHECK PAPER #1
PRESS START
12.1.3 When the recording paper in the
manual input tray is not fed into the unit
properly
The display will show the following.
1
Remove the recording paper.
2
Re-insert the recording paper.
Note:
L If the error message is still displayed, check the
recording paper specifications and re-install
recording paper. See page 32 for details.
CHECK PICK UP
INPUT TRAY #2