Printing Problems - Panasonic KX-MB263HX Operating Instructions Manual

Problem
I cannot find the unit in the
[Target Device] or [Device
Select] dialogue box when
operating the following
functions.
– Scanning
– Remote Control
– PC FAX (KX-MB773/KX-
MB783 only)
– Device Monitor

11.3.2 Printing problems

Problem
The printing quality is poor.
A BC
A blank sheet is ejected.
Black lines, white lines or
smudges appear on the
printed documents.
Coloured text is printed in
black instead of greyscale
when printing from Microsoft
PowerPoint or other
applications.
11.3.3 Scanner
Problem
I cannot scan.
The document is not fed into
the unit when using the unit
as a scanner (KX-MB773/KX-
MB783 only).
Cause & Solution
L The printer driver has not been installed. Install it on your computer (page
28).
Cause & Solution
L Some paper has instructions recommending which side to print on. Try
turning the recording paper over.
L You may have used paper with a cotton and/or fibre content that is over
20%, such as letterhead or resume paper.
L The recording paper is too damp. Use new paper.
L The remaining toner is low. Replace the toner cartridge.
L To check the drum life and quality, please print the printer test list (page 92).
If printing quality is still poor, replace the toner cartridge and drum unit.
L The toner save mode of feature #482 is ON (page 58).
L You placed the document facing the wrong way when using the copier.
L The other party placed the document in their fax machine the wrong way.
Check with the other party (KX-MB773/KX-MB783 only).
L The glass or rollers are dirty with correction fluid, etc. Clean them (page 88,
91). Please do not insert a document before correction fluid has dried
completely.
L Select [Colour] or remove the check next to [Greyscale] in the print
dialogue so that coloured text will be printed in greyscale.
Cause & Solution
L When scanning at a high resolution, a large amount of available memory is
required. If your computer warns of insufficient memory, close other
applications and try again.
L The unit is in use. Try again later.
L There is not enough space on the hard disk. Delete unnecessary files and
try again.
L Restart the computer, and try again.
L Check the connection between the computer and the unit (page 21, 29).
L You attempted to scan a document longer than the paper size which you
set. Change the setting or divide the document into the appropriate paper
size, and try again.
L Remove the document in the auto document feeder and re-insert it.
11. Help
75