Manual Time Setting - La Crosse Technology WIRELESS WEATHER STATION Instruction Manual

3. Press the SET key again to confirm and to enter
the "Manual Time setting" or exit the setting
mode by pressing the CH or SNOOZE key.
Note :
When 24h mode display is selected, the calendar format
will be date and month display.
When 12h mode display is selected, the calendar format
will be month and date display.

MANUAL TIME SETTING

In case the Weather Station is not able to detect the
DCF-signal (disturbances, transmitting distance, etc.),
the time can be manually set. The clock will then work as
a normal Quartz clock.
Hours (flashing)
To set the time :
1. The hour and minute digits start flashing in the
time display section.
2. Use the IN key to adjust the hours and the OUT
key to adjust the minutes.
while you adjust, the hours move 1 hour and the
minutes move 5 minutes.
3. Confirm with the SET key and enter the "Calendar
Setting" or exit the setting mode by pressing the
CH or SNOOZE key
Note :
The unit will still try to receive the signal at each full hour
despite a manual setting. When the signal is received,
the manually set time will automaticaly be replaced by
the received time. During reception attempts, the DCF
tower icon will flash. If reception has been unsuccessful,
the DCF tower icon will not appear but reception will still
be attempted the following hour.
Minutes (flashing)
If you hold the key
38