Item
Electrical Requirements
Table Dimensions
Table Height
Overall Height
Cutting Depth
Collet Capacity
Accessories
Weight
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 26
and 27 are included. If any parts are missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this manual as soon as possible.
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
Failure to follow all instructions listed below may result in
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the pres-
ence of flammable liquids, gases, or dust. Power tools create sparks which
may ignite the dust or fumes.
SKU 91130
For technical questions, please call 1-800-444-3353.
PRODUCT SPECIFICATIONS
120V / 60 Hz / 750 Watts / 4.3 Load Amps
1 HP Motor / 8,400-27,800 RPM Variable Speed
3- Prong, Grounded, Power Plug
27" Wide x 18" Deep x 1-1/2" Thick
38"
43-1/2"
1-27/64"
1/4" And 1/2"
1/4" Collet / 1/2" Collet / Miter Gauge
Guide Fence / Feather Board / Wrench
Dust Collector Port
75.6 Pounds
UNPACKING
SAVE THIS MANUAL
GENERAL SAFETY RULES
READ AND UNDERSTAND ALL INSTRUCTIONS
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
Description
WARNING!
REV 08/04
Page 2