Tascam TM-D4000 Owner's Manual page 92

Key to access the
Screen name
EQ LIBRARY
EXTERNAL
(external
CTRL
control)
FADER
POSITION
GROUPING
I/O SETUP
MACHINE
CTRL (machine
control)
MODULE ( EQ/
)
AUX/PAN
MODULE ( EQ/
DYN )
PAD/
PAN/BAL (pan/
balance)
SETUP
SETUP (MIDI and
Machine control)
What can be done using this
screen
EQ key (in library
Manages EQ library entries
section)
Controls external devices (the appear-
EXT CTRL
ance and functionality will change
according to the device being controlled)
Shows fader position for all modules or
FADER
all buss masters and Aux sends (also
POSITION
provide s buss and Aux send meters)
Allows fader group and cut group assign-
GROUPING key
ments to be made
DIGITAL I/O key
Digital input assignments, etc.
(alternates with fol-
lowing two screens)
MIDI/MC key
Selection and setup of remote devices to
(alternates with
be controlled by the TM-D4000
screen above and
following screen)
SEL key
Module
Sets parameters of EQ, pan and Aux
(alternates with
send levels
screen below)
Module SEL key
Sets parameters of EQ and dynamics
(alternates with
processor
screenabove)
Sets the digital pad and the phase for
PAD/
key
input modules
Sets the pan and balance for many mod-
PAN/BAL key
ules on one screen
OPTION key
General setup parameters, oscillator,
(alternates with fol-
etc.
lowing two screens)
MIDI/MC key
Sets MIDI and basic machine control
(alternates with fol- options
lowing two screens)
14 - Specifications, etc.
screen
8.2, "Other libraries"
9, "Machine Control"
4.10, "Checking fader and cut
status"
4.9, "Fader and cut groups"
3.1, "I/O setup"
9.1, "Selecting devices for con-
trol"
4, "Module operations"
4, "Module operations"
4.8, "Pad and phase(F)"
4.7, "Pan and balance"
3.3, "Option setup"
10.1, "MIDI settings" and 9.2,
"General parameters"
Main description
14–9