JVC KS-LX200R Instructions Manual page 11

The same programme can be received on
different frequencies.
Programme 1
broadcasting
on frequency A
Programme 1
broadcasting
on frequency B
Programme 1
broadcasting
on frequency C
Using Standby Reception
Standby Reception allows the unit to switch
temporarily to your favorite programme (PTY:
Programme Type) and Traffic Announcement (TA)
from the current source (another FM station, tape
and other connected components.)
• Standby Reception will not work if you are listening
to an AM station.
TA Standby Reception
When you press TP RDS while
listening to an FM station, the TP
indicator is lit during reception of a TP
(Traffic Programme) station and the TA
standby mode is engaged.
• When the station being received is not a TP station,
the TP indicator flashes. Press
to engage the TA standby mode. "SEARCH" appears
on the display, and TP station search starts. When a
TP station is tuned in, the TP indicator is lit.
7 If you are listening to a tape or other connected
components and wish to listen to a TP station,
press TP RDS to enter the TA standby mode. (The
TP indicator lights up.)
If a traffic programme starts broadcasting while the
TA standby mode is active, "TRAFFIC" appears and
the playback source changes to the FM band. The
volume increases to the preset TA volume level (see
page 14) and the traffic programme can be heard.
To deactivate the TA standby mode, press
TP RDS again.
PTY Standby Reception
Programme 1
broadcasting
on frequency E
• When the station being received is not a PTY station,
the PTY indicator flashes. Press
to engage the PTY standby mode. "SEARCH"
Programme 1
appears on the display, and PTY station search
broadcasting
starts. When a PTY station is tuned in, the PTY
on frequency D
indicator is lit.
7 If you are listening to a tape or other connected
components and wish to listen to a selected PTY
broadcast, press PTY to enter the PTY standby
mode. (The PTY indicator lights up.)
If the selected PTY programme starts broadcasting
while the PTY standby mode is active, the selected
PTY name appears and the playback source
changes to the FM band. The selected PTY
programme can then be heard.
To deactivate the PTY standby mode, press PTY
again.
¢ or 4
When you press PTY while listening to
an FM station, the PTY indicator is lit
during reception of a PTY station and
the PTY standby mode is engaged.
The selected PTY name stored on
page 12 flashes for 5 seconds.
¢ or 4
11