Radio Basic Operations; Listening To The Radio - JVC KS-LX200R Instructions Manual

Listening to the radio

You can use either automatic searching or manual
searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1–3, AM).
• Press and hold SOURCE (BAND)
repeatedly to select the FM band (FM1,
FM2 or FM3.)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
Press
stations of higher frequencies.
Press 4
stations of lower frequencies.
When a station is received, searching
stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.

RADIO BASIC OPERATIONS

SCM MONO LOCAL MODE
DISP
SEL 7 8 9 A TT S
S
M
Selected band appears
¢ to search
to search
BAND
TP INT RPT RND
SOURCE PTY
RDS 10 11 12 OFF
R
To tune in FM stations only with strong signals
1
Press MODE ATT.
"MODE" appears on the display, and the number
buttons can work as different function buttons.
2
Press LOCAL, while "MODE" is still on the display,
so that the LOCAL indicator lights up on the
display.
This function works only while searching FM
stations, including SSM preset (see page 8).
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
Searching a station manually:
Manual search
1
Select the band (FM1–3, AM).
• Press and hold SOURCE (BAND)
repeatedly to select the FM band (FM1,
FM2 or FM3.)
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Press and hold
"MANU" (manual) starts flashing on
the display.
CONTINUED ON THE NEXT PAGE
0
¢ or 4
until
7