Panasonic Viera TX-L42WT50E Operating Instructions Manual page 45

Lcd television viera tx-l42wt50e; viera tx-l47wt50e; viera tx-l55wt50e
Hide thumbs Also See for Viera TX-L42WT50E:
Table of Contents

Advertisement

Menu
Item
SPDIF Delay
Reset to Defaults
Connection Test,
Network Connection,
Wireless Network
Settings, IP/DNS
Settings
Network Link Settings
Software Update
New Software Message
Network Status
Timer Programming
Off Timer
Auto Standby
Eco Navigation
Recording Setup
Bluetooth Setup
Pairing
Cursor Settings
Adjustments / Configurations (alternatives)
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT and HDMI2
(ARC function) terminals if the sound does not synchronise the image
For DVB mode
Press the OK button to reset the current Sound Mode, [Balance], [Headphone
Volume] and [Surround] to the default settings
Sets the network setting to use in your network environment (p. 89, 90)
Sets to control the TV with the devices connected to the network (p. 88)
Checks for available software updates from the Panasonic website
Selects whether to give a notification message when new software is found via
network [Off] / [On]
Displays the network status (MAC Address, current network settings, etc.)
Sets a timer to record or remind forthcoming programmes (p. 58)
For DVB mode
Sets the duration of time until the TV automatically goes into Standby mode
[Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes) (p. 23)
Sets the duration of time that the TV will remain on when no operation is
performed [Off] / [2] / [4] (hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function
and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.
Automatically sets the TV to the most suitable energy-saving mode
If you press the OK button, the following items are set as below:
[Eco Mode], [VIERA Link], [Power off Link], [Standby Power Save],
[Power Save]
[On]
[Intelligent Auto Standby]
[Auto Standby]
[2 hours]
[Front Logo LED]
[Off]
Settings for the recording feature of the USB HDD / SD Card (p. 71)
Settings for the specific devices supporting Bluetooth wireless technology (p. 113)
Registers the VIERA Touch Pad Controller (supplied) to this TV
Only 1 touch pad controller can be registered.
Sets for the cursor of the touch pad controller
[On (No reminder)]
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents