Mitsubishi Electric Mr. Slim MSZ-FE09NA Service Manual page 18

Operation and operating range
i-see sensor moves 30 degrees from the center in both right and left side.
i-see Sensor turning to the left
i-see Sensor operates as follows in accordance with AREA setting made with the remote controller.
"AUTO" in AREA setting: first turning to the LEFT for adjusting the position then ·····
CENTER
(The sensor turns to the right, left and center.)
"RIGHT" in AREA setting: first turning to the LEFT for adjusting the position then ·····
CENTER
(The sensor turns to the right and center.)
"LEFT" in AREA setting: first turning to the LEFT for adjusting the position then ·····
CENTER
(The sensor turns to the left and center.)
The sensor finishes turning to one area to another for 3 seconds and it operates one area for 5 seconds.
8-8. TIMER OPERATION
1. How to set the time
(1) Check that the current time is set correctly.
NOTE: Timer operation will not work without setting the current time. Initially "0:00 AM" blinks at the current time dis-
play of TIME MONITOR, so set the current time correctly with CLOCK SET button.
How to set the current time
(a) Press the CLOCK set button.
(b) Press the TIME SET buttons (
• Each time FORWARD button (
BACKWARD button (
• Pressing those buttons longer, the set time increases/decreases by 10 minutes.
(c) Press the CLOCK set button.
(2) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(3) Set the time of timer.
ON timer setting
(a) Press ON TIMER button (
(b) Set the time of the timer using TIME SET buttons (
OFF timer setting
(a) Press OFF TIMER button (
(b) Set the time of the timer using TIME SET buttons (
Each time FORWARD button (
ton ( ) is pressed, the set time decreases by 10 minutes.
2. To release the timer
To release ON timer, press ON TIMER button (
To release OFF timer, press OFF TIMER button (
TIMER is cancelled and the display of set time disappears.
i-see Sensor turning to the center
RIGHT CENTER
RIGHT CENTER
LEFT CENTER
) to set the current time.
and
) is pressed, the set time increases by 1 minute, and each time
) is pressed, the set time decreases by 1 minute.
) during operation.
and
) during operation.
and
) is pressed, the set time increases by 10 minutes: each time BACKWARD but-
).
).
18
i-see Sensor turning to the right
LEFT CENTER ·····
RIGHT CENTER ·····
LEFT CENTER ·····
).
).