Intelligent Iso; Sensitivity - Panasonic LUMIX DMC-TZ65 Operating Instructions Manual

Using REC/MOTION PICTURE menu
(Continued)
REC/PLAY switch:
Set quality of picture.
MODE: → REC menu
→ REC menu
Settings: Fine (High quality, priority to picture quality)
Standard (Standard quality, priority to the number of pictures)
Aspect ratio of picture can be changed according to printing or playback format.
MODE: → REC menu
→ REC menu
Settings:
4
3
Same as 4:3 TV or computer Same as normal film camera
Edges may be cut off when printing – be sure to check in advance.
In (INTELLIGENT AUTO mode),
changing the 'PICTURE SIZE'.
Camera automatically adjusts ISO sensitivity and shutter speed according to movement
of subject to avoid blur. Higher ISO sensitivity reduces subject blur and jitter but can
increase interference. Please select maximum ISO sensitivity according to table below.
MODE: → REC menu
Settings: OFF / / /
Setting guide
Movement of subject Slow
ISO sensitivity Low
Shutter speed Slow
Interference Low
70
VQT1Z93
QUALITY
ASPECT RATIO
3 16
2
For playback on widescreen/
high definition TV
(9.5M) and (2M) may be selected by

INTELLIGENT ISO

Fast
High
Fast
High
See P.18 for menu setting procedure.
Slow-moving subject
ISO sensitivity 200
(Shutter speed 1/30)
Shutter speed and ISO sensitivity are displayed in the screen for a few seconds after
recording.
If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (P.77).
Blurring may occur depending on brightness, and size, position, and speed of
movement of the subject (e.g. if subject is too small, is on edge of picture, or starts
moving as soon as shutter button is pressed).
Scope of flash recording (P.44)
9
Set ISO sensitivity (sensitivity to lighting) manually.
We recommend higher settings to take clear pictures in darker locations.
MODE: → REC menu
Settings: AUTO / 80 / 100 / 200 / 400 / 800 / 1600
Setting guide

SENSITIVITY

Location
(recommended)
Shutter speed
Interference
AUTO: Automatically set with range up to 400 (1000 when using flash) according to
brightness.
Scope of flash recording (P.44)
Cannot be set when 'INTELLIGENT ISO' is used (
If interference becomes noticeable, we recommend reducing the setting, or selecting
'NATURAL' in the 'COLOR MODE' (P.77).
Fast-moving subject
ISO sensitivity 800
(Shutter speed 1/125)
SENSITIVITY
80 1600
Bright
Dark
(outdoors)
Slow Fast
Low High
is displayed)
71
VQT1Z93