Using The Clock/Timers Menu - Sony FD Trinitron WEGA KD-36FS170 Operating Instructions Manual

Using the Clock/Timers 0 Menu
To access the Clock/Timers Menu.
use the following steps:
To Display To Highlight _ ToSelect
MENU
Press !!, to highlight an option, then press (_J.
Timer 1
Ch_ck/Fimers functions apply to analog channels only. You cannot set the Clock
Timer 2 Timers for digital chmmels.
Scheduled Use the timers to program your TV to turn on and off by day, time,
viewing duration, and channel. The timer duration is a maximum of six hours.
When the channel is fixed, it is not necessary to set the channel.
1 Use the 4' or !1,buttons to highlight Timer 1 or Timer 2, then press
2 Use the 4" or ,I, buttons to enter the desired day, start time, duration
and channel, then press -,_]. The timer status should be On when the
Timer has been set, and the timer light on the front panel of the TV
should be on.
3
Press (_) to exit the menu.
_/a select off t0 tUrn 0ff the Timer.YoUrpievious SettingsWill be Saved!
Current Time Set your TV to the current day and time. Press [_ to open the Current
Time menu:
1 Use the 4" or ,I, buttons to enter the correct day and time, then press
2 Press (_) to exit the menu.
Sd_ Youmust set the Current T me before you can use Tmer I or Tmer 2
f'a When you perform Auto Program,Timer 1and Timer 2 settings will be clearediAlso; in the event of
any loss0f power, Current Time,Timer 1; and Timer 2 settingswill be cleared.
27