Audio; Channels - Sony WEGA KE-37XS910 Operating Instructions Manual

Audio
Good picture, no sound Press so that disappears fi'om the screen (see page 50).
Make sure the option is set to in the Audio Menu (see page 87).
Audio noise Communication problems may occur if the infi'ared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infi'ared communication equipment closer together.
Cannot gain enough volume Increase the volume of the cable box using the cable box's remote control. Then
when using a cable box press : and adjust the TV's volume.
Sound seems weak or The TV's audio might be set to : or , when it might be better set to
insufficient . In the Audio Menu (see page 86), set the setting to . If
already set to , switch to (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on Ifthe option is set to and the option is set to (in
external speakers order to output the sound to your audio system) use your audio receiver to adjust
the sound (see page 87). Or, to use the TV remote control, set the
option to .
To turn on the TV speakers, set the option to (see page 87).
IF
Channels
Cannot receive upper channels Change the option to (see page 90).
(UHF) when using an antenna Use in the Channel Menu to add receivable channels that are not
presently in the TV's memol 7 (see page 90).
TV is fixed to one channel Use in the Channel Menu to add receivable channels that are not
presently in the TV's memory (see page 90).
Check your Channel Fix settings (see page 90).
Cannot receive any channels Use in the Channel Menu to add receivable channels that are not
when using cable TV presently in the TV's memory (see page 90).
Make sure the option is set to in the Channel Menu (see page 90).
Cannot receive or select Use in the Channel Menu to add receivable TV channels that are
channels not presently in TV memory (see page 90).