Installation Procedure; Removing The Tape; Installing The Toner Cartridge - TallyGenicom 9045N User Manual

Installation Procedure

This section describes how to install the printer.

Removing the Tape

When the printer is first taken out of the packaging box, the covers of the printer are taped as
shown on page 2. Remove all of the tapes.
There is tape securing the paper trays, the paper support and the fuser locking instructions.
Remove the fuser locking device by pushing the tabs as shown on the instructions at the rear
of the printer.
Install any optional accessories next. See chapter 6.

Installing the Toner Cartridge

The Toner Cartridge supplied with the Installation Kit provides approximately 10,000 pages of
print with 5% coverage. There are two alternatives available for replacement Toner cartridges. They
allow printing of approximately 10,000 or 17,000 pages under the above conditions. When install-
ing the Toner Cartridge, take note of the following points:
Do not subject it to direct sunlight or strong light.
Do not touch the surface of the photosensitive drum. Do not stand or place the Toner Car-
tridge upside down. The drum might get damaged.
1. Open the top cover.
2. Take the Toner Cartridge out of the box and shake it 7 to 8 times as shown in the diagram.
Jul 07
45 PPM Laser Printer User Guide 1-7

Installation Procedure