Split-Time Function; Measuring Two Close Times; Regatta Mode - TAG Heuer AQUARACER CALIBRE S REGATTA User Manual

SPLIT-TIME, OR INTERMEDIATE TIME, FUNCTION
This function enables you to measure intermediate times during a simple timing.
Note: Before each timing, the hands must be at zero. If necessary, reset to zero by pressing B.
1. Start: push A (START)
2. Stop intermediate time 1: push B (SPLIT TIME)
> Read intermediate time 1
3. Fly back: push B (RESTART - FLYBACK)
4. End intermediate time 2: push B (SPLIT TIME)
> Read intermediate time 2
5. Fly back: push B (RESTART - FLYBACK)
etc.
6. End: push A (STOP)
> Read total time
7. Reset to zero: push B
Note: The split-time function cannot be used during additional timing.

MEASURING TWO CLOSE TIMES

This function enables you to measure two times that are close together.
Note: before each timing, the hands must be at zero. If necessary, reset them to zero by pressing B.
12
1. Start: Push A (Start)
2. Measure time 1: Push B
3. Measure time 2: Push A (Stop)
> Read time 1
4. Call up time 2 Push B
> Read time 2
5. Reset to zero Push B

REGATTA MODE

Moving to REGATTA mode
Note: To move to REGATTA mode, the chronograph must be stopped and set to zero.
– If you are in TIME mode, press the crown twice
– If you are in CHRONO mode, press the crown once.
The left counter now indicates REGATTA. The hour hand is positioned underneath the minute hand,
and the seconds hand is at 12 o'clock. The last countdown setting is displayed automatically.
Before the countdown starts: REGTATTA mode
Example: Countdown set to 10 minutes (default setting) (fig. 5).
The arrow indicates the direction of the seconds hand during the countdown. The minute hand is
below the hour hand.
Push button A: Start countdown
Crown: One short press to move to TIME mode
Pushbutton B: – Setting (short press)
– Stop countdown (long press)
13
13