Controls And Indicators; Front Panel - TECHWOOD CDC-85 Owner's Manual

CONTROLS AND INDICATORS

Front Panel

1. POWER STANDBY / ON button and Indicator
2. Disc Select buttons (1~5)
There are five Disc Selection buttons numbered 1
through 5, each one corresponding to a numbered disc
position on the disc tray. When your disc player is in play-
back mode, you can press one of these buttons to halt
playing of the current disc and start playback of the disc
whose number corresponds to the button you have
pressed.
3. Repeat button
This button is used for repeating one track, one disc or
all discs.
4. Program button
Use this button to program the order in which the
selections are played.
5. Clear button
Use This button to cancel the programmed playback.
6. Time button
The Time button allows any one of four different types of
tracking and time information to be displayed. Each press
of the Time button advances the display once.
7. Disc Tray
Load a disc on this tray with its label side up while the tray
is open.
8. Pause button ( )
Pressing Pause button will halt playback of a disc tem-
porarily with the display showing the Pause indicator and
current track and time. Pressing the Play button again will
resume playback starting from the current track and time
on the disc.
9. Stop button ( )
Pressing the Stop button will halt playback of a disc and
advance the disc to its end. The last track and total time
of the disc will be displayed. Pressing the Play button will
resume playback of the disc starting at its first track.
10. Open/Close button (
With one touch of this button the disc compartment
opens for disc loading. With another touch the compart-
ment closes.
)
11. Disc Skip button
The Disc Skip button located inside on top of the disc
tray is used to rotate the disc tray to its next disc playing
position in a clockwise direction. With each press of this
button, the tray will advance one disc position.
Ex : 1 2 3
12. Play button (
Pressing the Play button will start playback of all discs
loaded onto the disc tray. They will be played in sequen-
tial order starting with the disc loaded into position one
on the tray. Playback in this manner is called
Continuous Play.
13. Search Forward button (
When pressed and held down, the Search Forward but-
ton allows the listener to fast forward to a particular
musical passage on disc. When fast forwarding, sound
will be heard and appropriate track and time information
will be displayed.
14. Search Reverse button (
When pressed and held down, the Search Reverse but-
ton allows the listener to fast reverse to a particular
musical passage on disc. As the disc is spinning in
reverse, sound will be heard and appropriate track and
time information will be displayed.
15. Skip Forward button (
With each press of the Skip Forward button, the disc
currently being played will advance to the beginning of
its next track and resume playing.
16. Skip Reverse button (
With one press of the Skip Reverse button, the disc cur-
rently being played will reverse its direction to the begin-
ning of its current track and resume playing. With two
presses of the Skip Reverse button, the disc will reverse
its direction to the beginning of its previously recorded
track and resume playing.
17. Display
This display shows the current operating status of this
unit.
7
4 5 1
)
)
)
)
)