Important Safety Instructions - TECHWOOD CDC-85 Owner's Manual

IMPORTANT SAFETY INSTRUCTIONS

CAUTION:
• Read all of these instructions.
• Save these instructions for later use.
• Follow all warnings and instructions marked on the audio
equipment.
1) Read instructions - All the safety and operating instruc-
tions should be read before the product is operated.
2) Retain instructions - The safety and operating instructions
should be retained for future reference.
3) Heed Warnings - All warnings on the product and in the
operating instructions should be adhered to.
4) Follow Instructions - All operating and use instructions
should be followed.
5) Cleaning - Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
6) Attachments - Do not use attachments not recommended
by the product manufacturer as they may cause hazards.
7) Water and Moisture - Do not use this product near water-
for example, near a bath tub, wash bowl, kitchen sink, or laun-
dry tub; in a wet basement; or near a swimming pool; and the
like.
8) Carts and Stands - The product should be used only with a
cart or stand that is recommended by the manufacturer.
9) A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the product and cart combination to overturn.
10) Wall or Ceiling Mounting - The product should be mount-
ed to a wall or ceiling only as recommended by the manufac-
turer.
11) Accessories - Do not place this product on an unstable
cart, stand, tripod, bracket, or table. The product may fall,
causing serious injury to a child or adult, and serious damage
to the product. Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold with the
product. Any mounting of the product should follow the manu-
facturer's instructions, and should use a mounting accessory
recommended by the manufacturer.
12) Ventilation - Slots and openings in the cabinet are provid-
ed for ventilation and to ensure reliable operation of the prod-
uct and to protect it from overheating, and these openings
must not be blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa, rug, or other
similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventila-
tion is provided or the manufacturer's instructions have been
adhered to.
13) Ventilation - The product should be situated so that its
location or position does not interfere with its proper ventila-
tion. For ob a bed, sofa, rug, or similar surface that may block
the ventilation openings: or, placed in a built-in installation,
such as a bookcase or cabinet that may impede the flow of air
through the ventilation openings.
14) Power Sources - This product should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
15) Grounding or Polarization - This product may be
equipped with a polarized alternating-current line plug (a plug
having one blade wider than the other). This plug will fit into
the power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety pur-
pose of the polarized plug.
Alternate Warnings - This product is equipped with a three-
wire grounding-type power oltlet. This is a safety feature. If
outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding- type plug.
16) Power-Cord Protection - Power-supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point
where they exit from the product.
17) Protective Attachment plug - The product is equipped
with an attachment plug having overload protection. This is a
safety feature. See Instruction Manual for replacement or
resetting of protective device. If replacement of the plug is
required, be sure the service technician has used a replace-
ment plug specified by the manufacturer that has the same
overload protection as the original plug.
18) Cleaning - The product should be cleaned only as recom-
mended by the manufacturer.
19) Power Lines -An outdoor antenna should be located
away from power lines.
20) Outdoor Antenna Grounding - If an outside antenna or
cable system is connected to the product, be sure the antenna
or calbe system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides infor-
mation with regard to proper grounding of the mast and sup-
porting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location of anten-
na-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
"Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Section 820-40 of the NEC which provides guide-
lines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of
them building, as close to the point of cable entry as practical.
2