Zooming In; Setting Rating Level And Password; Selecting A Rating Level; Setting A Password - TECHWOOD DVR98 Quick Start Manual

Zooming In

Zoom allows you to zoom in and enlarge the picture on the
screen to either 4 times (4X) or 16 times (16X) its normal size.
Press during normal or still playback.
ZOOM
To resume normal size, press
and resume normal playback or still playback.
N N N N o o o o t t t t e e e e s s s s : : : :
• Some DVDs might not respond to Zoom.
• Zoom does not work on subtitles or menus included on
DVD video discs.
SETTING RATING LEVEL AND
PASSWORD
You can prohibit the playing of specified DVDs which are
unsuitable for children. Some DVD discs contain a restriction
level which enables parents to remove scenes or prevent
playback of discs by children. Your DVD player has a password
device designed to prevent children from changing the level.

Selecting a Rating Level

1. Press .
DVD SET UP
2. At the setup screen, press
, then press .
ENTER
N N N N o o o o t t t t e e e e : : : : The password is preset to 1,2,3,4. The rating is
preset to .
3. Enter a password and press
4. Repeatedly press
ENTER
You cannot play DVD video discs rated higher than the
level you selected unless you cancel the parental lock
function. For example, when you select level 7, discs rated
higher than level 7 are blocked and cannot be played.
The parent lock level is equivalent to the following USA
movie ratings.
Level
7
6
4
3
1
5. Press to exit.
DVD SET UP
N N N N o o o o t t t t e e e e s s s s : : : :
• Some titles do not match with the above rating levels.
to cancel the zoom feature
ZOOM
or to select
RATING
.
ENTER
to select the desired level.
Movie Rating
NC-17
R
PG-13
PG
G
• If you change the level and enter a password, playback of
all DVDs with ratings higher than your selection will be
blocked, unless you enter the correct password again. For
example: if you change the level to 5, the DVD player will
not play discs with ratings of 6, 7, or 8 unless the correct
password is entered from the remote control.

Setting a Password

If you change the rating level to 7 or lower, you must enter a 4-
digit password to access playback of discs with higher ratings.
To set this password, follow these steps.
1. Press .
DVD SET UP
2. At the setup screen, press
press .
ENTER
3. Type a 4-digit password into
I I I I m m m m p p p p o o o o r r r r t t t t a a a a n n n n t t t t : : : : Do not forget your password.
4. Type same the 4-digit password into
.
ENTER

Clearing Your Password

If you forget your password, you can clear the current
password.
At the SETUP screen, press
.
ENTER
Enter a 4-digit number (for example, 2850), then press
The 4-digit password is cleared.

SELECTING TV ASPECT

Select the appropriate screen type according to your TV set.
Conventional size screens use a 4:3 aspect ratio, and wide-
screens use a 16:9 ratio.
1. Press .
DVD SET UP
2. At the setup screen, press
then press .
ENTER
3. Repeatedly press
ENTER
press . You must select the type of TV picture
DVD SET UP
(aspect ratio) that corresponds to the type of TV you are
connecting to the DVD unit.
(Pan and Scan) — If you have a conventional TV set
4:3 PS
and your DVD is not formatted for widescreen viewing,
use this setting.
(Letterbox) — If you have a conventional TV set and
4:3 LB
your DVD is formatted for widescreen viewing, use this
setting. All video material not formatted in the Pan and
Scan style is played back in the letterbox style. Black
bands appear at the top and bottom of the screen.
21
to select , then
PASSWORD
. (For example, 1234).
OLD
, then press
NEW
to select , then press
PASSWORD
ENTER
or to select
TV DISPLAY,
to select the desired aspect, then
.