TECHNIKA PRO SH-1060 User Manual page 72

Trouble Shooting
Problem
The images are
blurry.
The images are
too bright.
The images are
too dark.
The camera can
not playback.
No sound in
playback mode.
72
Possible Cause
The camera is moving
when you press the
shutter release button.
The focus brackets are
not positioned on the
subject.
Use macro mode to
shoot subjects within
normal focus, or vice
versa.
The light is dim and
the fl ash is off.
The lens is dirty.
The fl ash is on when
the subject is bright
enough.
The camera is too close
to the subject when
taking images with the
fl ash on.
Light sources other
than the fl ash provide
too much light.
The fl ash is off and the
subject is in dark.
The fl ash is on but the
subject is not within
the effective range of
the fl ash.
The camera is not in
the playback mode.
The volume is too low.
Solution
Hold the camera steady or
use a tripod when taking
images.
Position the focus brackets
on your subject.
Set the camera to shoot
in normal focus or macro
focus and then take the
image again.
Use a tripod and turn on
the fl ash.
Gently clean the lens.
Turn off the fl ash.
Move back from the subject
and take the image again.
Avoid pointing the camera
at bright light sources and
use exposure compensation.
Turn on the fl ash.
Move closer to the subject
(The effective range of
fl ash is 1.8M~2.5M).
Press to switch to
playback mode.
Adjust the volume. See
page 66.