Setting Drive Mode - TECHNIKA PRO SH-1060 User Manual

Setting Drive Mode

When you select DRIVE MODE in the capture menu, you can choose
from three shooting modes: Single, Continuous and Burst modes.
Note 1: The fl ash mode and self-timer is "Off" when using
"CONTINUOUS" and "BURST".
Note 2: The CONTINUOUS mode will stopped when the SD card or the
internal memory is full. A "CARD FULL" warning appears on the
LCD .
Setting
SINGLE
CONTINUOUS
BURST
Using the Capture/Video Menu
1
In Capture menu, select "DRIVE
MODE".
2
Select "SINGLE", "CONTINUOUS" or
"BURST".
3
Press OK button to confi rm the setting.
Takes a single image. Press the shutter release
button once to capture the image.
Takes a series of images when you press down
and hold the shutter release button. The camera
will continue to take images until you release the
shutter release button. When selected, the icon
appears on the LCD monitor.
Takes 5 images when you press down the
shutter release button once. When selected, the
icon appears on the LCD monitor.
Function
37