Menu Operations - JVC KD-R536 Instructions Manual

(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
*2
*3*4
*4
(Loudness)
(Volume adjust)
(Line output
mode)
*1 The illumination control lead connection is required. (See "Installation/Connection Manual".)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*2 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*3 If you are using a two-speaker system, set the fader level to "00".
*4 This adjustment will not affect the subwoofer output.
12 | ENGLISH
For settings, page 4.
For settings, page 10. (KD-R536 only)
Selects the display and button illumination adjusted in the <BRIGHTNESS>/
<COLOR SETUP> setting.
: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *1
: Selects the Night adjustments.
: Selects the Day adjustments.
/
illumination for day and night.
/
: Scrolls the display information once.
: Repeats scrolling (at 5-second intervals).
: Cancels.
: Shows the TAG information while playing MP3/WMA tracks.
: Cancels.
For settings, page 11.
: Adjusts the front and rear speaker output balance.
: Adjusts the left and right speaker output balance.
: Boosts low and high frequencies to produce a well-balanced sound at
a low volume level.
: Cancels.
: Presets the volume adjustment level of each source,
compared to the FM volume level. Before adjustment, select the source you
want to adjust. ("VOL ADJ FIX" appears if "FM" is selected.)
Select if the REAR/SW terminals are used for connecting the speakers or
subwoofer (through an external amplifier).
: Subwoofer
: Speakers
Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press
: Brightness settings for the display and button
: Sets the brightness levels
.
or .
.