Wiring Connection - Kenwood KDC-DAB43U Quick Start Manual

Wiring connection

USB connector
AUX input (Stereo)
Use the mini-plug (3.5 mm ø) cable which is
stereo type and does not have any resistance.
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring
harness as illustrated below.
Red (Ignition wire)
Unit
Yellow (Battery wire)
Default wiring
8 | Quick Start Guide
DAB antenna input (SMB)
X <DAB ANT PWR> (page 6)
DAB antenna Cord
Red (A–7 Pin)
Vehicle
Yellow (A–4 Pin)
Yellow (Battery wire)
Red (Ignition wire)
Red (A–7 Pin)
Yellow (A–4 Pin)
8 6 4 2
Connector A
7 5 3 1
8 6 4 2
Connector B
7 5 3 1
FM/AM antenna input (JASO)
Rear output/ Sub Woofer output switchable
X <SWITCH PRE> (page 6)
Fuse (10A)
R L
Wiring harness D
If no connections are made, do not let the wire come out from
the tab.
Brown
(Mute control wire)
Light Blue/Yellow
(Steering remote control wire)
Blue/White
(Power control/ Antenna
control wire)
Pin Color and function
A4 Yellow Battery
A5 Blue/White Power control
A7 Red Ignition (ACC)
A8 Black Earth (ground) connection
Antenna Cord
Connect to the terminal that is
grounded when either the telephone
MUTE
rings or during conversation.
To connect the Kenwood navigation
system, consult your navigation
manual.
To use the steering wheel remote
control feature, you need to an
REMOTE CONT
exclusive remote adapter (not
STEERING WHEEL
supplied) matches your car is
REMOTE INPUT
required.
Connect either to the power control
P.CONT
terminal when using the optional
power amplifier, or to the antenna
ANT. CONT
control terminal in the vehicle.
Pin Color and function
B1 / B2 Purple ¢ / Purple/black ¤ Rear speaker (right)
B3 / B4 Gray ¢ / Gray/black ¤
Front speaker (right)
B5 / B6 White ¢ / White/black ¤ Front speaker (left)
B7 / B8 Green ¢ / Green/black ¤ Rear speaker (left)