Table of Contents
Advertisement
thoroughly tested so that any leaks or other problems can be
detected.
We recommend filling the spa to an identifiable level and
covering it to avoid water loss through evaporation. For one 24-
hour period, the spa should be operated continuously,
occasionally switching the dual-speed pump to high speed and
turning on the single-speed pump and the air blower to test the
pressure-side pipes. For another 24-hour period, the spa should
be completely inactive to test the suction and venturi lines. If the
water level has not changed and no other problems have been
detected after either of these tests, you are ready to complete
the installation by filling the trenches, etc.
14
Hide quick links:
Advertisement
Table of Contents
