Subaru IMPREZA 2002 Owner's Manual page 96

4. Place the ignition key into the ignition switch and
cycle the switch from LOCK to ON ten times within
15 seconds. Be sure to stop at the LOCK position.
The horn will sound once to indicate that you are in
the transmitter programming mode.
NOTE
You must finish the next step (opening the driv-
er's door) within 45 seconds of starting this pro-
cedures.
To program the transmitters:
1. Open the driver's door.
2. Close the driver's door.
HB1005BB
1) Press any button.
3. Press and release any button on the transmitter
that you wish to program into the system. The horn
will sound two times to indicate that the transmitter
has been programmed.
Any additional transmitters can also be programmed
at this time. Repeat steps 1 through 3 for an addi-
tional transmitter.
To exit the programming mode:
1. After all of your transmitters are programmed, re-
move the key from the ignition switch.
The horn will sound three times to indicate that the
system has exited the programming mode.
2. Make sure that the keyless entry system properly
Keys and doors
HB1000DC
– CONTINUED –
2-11