Subaru IMPREZA 2002 Owner's Manual page 203

Audio
B How to preset stations
1. Press the " FM/AM" selection button to select AM,
FM1 or FM2 reception.
2. Press the " SCAN" button (3) or tune the radio
manually until the desired station frequency is dis-
played.
3. Press one of the preset buttons (5) for at least
1.5 seconds to store the frequency. The frequency
of the station will flash once on the display at this
time. If the button is pressed for less than 1.5 se-
conds, the preceding selection will remain in
memory.
NOTE
If the connection between the radio and battery
is broken for any reason such as vehicle mainte-
nance or radio removal, all stations stored in the
preset buttons are cleared. If this occurs, it is
necessary to reset the preset buttons.
5-18