Keys and doors
Note that in this mode, DOORS MUST BE MANUAL-
LY LOCKED.
B To enter the passive mode
1. Remove the side sill cover on the driver's side.
1)Open the driver's door.
2)Remove the clip by prying the edge with screw-
driver.
3)Remove the side sill cover by pulling it up.
2-16
HB2036BA
1) Connector for SRS airbag system (yel-
low)
2) Blue (1P)
2. Connect the blue (1 pole) connector.
3. Turn the ignition switch from the " LOCK" to the
" ON" position.
4. Install the side sill cover.
To place the system in active arming mode (remote
required for activation), disconnect the white con-
nector.
HB2038BC