Setting The Clock (Time Zone, Auto Daylight Saving Time) - Panasonic Palmcorder Quasar VM-L152 Operating Instructions Manual

Setting the Clock
3a
Setting the Time Zone
The Camcorder is preset to Eastern time.
[ Time Zone chart ]
3b
Auto Daylight Saving Time
Clock will auto-adjust to daylight saving time (DST).
DST: AUTO
Spring (First Sunday in April) :
ahead one hour.
Autumn (Last Sunday in October) :
back one hour.
3c
Setting Date and Time
Date and time including leap year are
calculated up to DEC 31, 2099.
EXAMPLE :
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
02.L152 Getting p08-15
Press UP or DOWN to
select local time zone.
Press DISPLAY to
confirm entry.
• When traveling, repeat this operation and
select one of the 8 listed time zones to
set the clock to local time.
Note :
• Clock may lose or gain up to 2 minutes
per month.
• When traveling outside the listed time
zones, set clock to local time manually.
• To adjust or set clock, see "Setting Date
and Time" bottom of page.
The Camcorder is preset to DST:
If DST is not observed in your area, set
to OFF by doing the following.
Press UP or DOWN to
select OFF or AUTO.
Press DISPLAY to
confirm entry.
Note:
• Auto DST does not function if time zone
is set to Hawaii or Samoa (see "Setting
the Time Zone" above).
14
AUTO
Press or hold down UP or
DOWN to select hour, then
press DISPLAY to fix.
Repeat for minute, month, day,
and year.
Clock starts when year is
entered and DISPLAY is
pressed.
02.2.18, 1:38 PM
.