Meterbridge - SoundCraft LIVE 8 User Manual

39 MONO CHECK
Normally the Phones output monitors the Stereo Mix. Pressing the MONO CHECK switch
sums the L & R outputs to check for phasing problems. The main outputs are not affected
by the position of the switch.
40 MUTE MASTERS
Four MUTE MASTER switches provide muting control of any channels which have been
assigned to a mute group using the M1-M4 switches on the input channels. The associated
LED illuminates when the MUTE is active.
41 PHONES JACK
The PHONES output appears on a 3-pole 1/4" jack, suitable for headphones with an
impedance of 200 ohms or higher.

METERBRIDGE

A full width Meterbridge provides continuous monitoring of all Inputs, Groups and Mix L/R
signals on three-colour bargraph meters. All the meters are peak reading.
Normally the Left and Right meters show the level of the Mix Left and Right outputs. If any
PFL or AFL switch is activated the meters are switched to display the level of the selected
PFL or AFL signal.
Note that '0' on the bargraph scale corresponds to a nominal +4dBu.
25