Table of Contents
Advertisement
22
24
MUTING
All post-fade outputs from the channel may be muted by pressing the MUTE switch, and the associated
LED illuminates to show that the channel is OFF.
Alternatively the channel may be selected to any one or more MUTE BUSES to provide grouped
muting under the control of the MUTE masters on the far right-hand side of the console. In either case
the mute status is shown by the LED.
25
PFL
When the PFL switch is pressed, a mono sum of the pre-fade signal is fed to the headphones and L
& R meters, where it replaces the normal Mix L/R signal. The PFL/AFL ON LED on the master section
illuminates to warn that the headphones and the meters are now responding to the PFL/AFL selection
and the PFL LED on the input channel lights to identify the active channel. This is a useful way of
listening to any required input signal without interrupting the main mix, for making adjustments or
tracing problems.
Hide quick links:
Advertisement
Table of Contents
