Sound Adjustment; Timer; Listening To Audio From Ipod Or Iphone - Panasonic SC-HC35 Operating Instructions Manual

Sound adjustment

The following sound effects can be added to the audio output.
Preset EQ Press [PRESET EQ] repeatedly to select
"HEAVY", "SOFT", "CLEAR", "VOCAL" or "FLAT".
Bass or 1 Press [SOUND] repeatedly to select "BASS"
Treble or "TREBLE".
2 Press [2, 1] to adjust the level (-4 to +4).
Surround 1 Press [SOUND] repeatedly to select
Sound "SURROUND".
2 Press [2, 1] to select "ON SURROUND".
≥ To cancel surround sound, select
"OFF SURROUND" in step 2.
≥ If interference in FM stereo reception increases,
cancel the surround sound effect.
D.Bass Press [D.BASS] during play to select
"ON D.BASS" or "OFF D.BASS".
≥ You may experience a reduction in sound quality when these effects are used
with some sources. If this occurs, turn the sound effects off.

Timer

Setting the clock
This is a 24-hour clock.
1
Press [CLOCK/TIMER] to select "CLOCK".
2
Within 10 seconds, press [3, 4] to set the
time.
3
Press [OK].
≥ To display the clock, press [CLOCK/TIMER].
≥ Reset the clock regularly to maintain accuracy.
Play timer
You can set the timer to come on at a certain time to wake you
up.
This unit offers 3 optional play timers.
Preparation
≥ Turn the unit on and set the clock (
≥ Prepare the music source (disc, radio, iPod/iPhone, USB or
AUX) and set the volume.
1
Press [CLOCK/TIMER] repeatedly to select
"FPLAY 1", "FPLAY 2" or "FPLAY 3".
2
Within 10 seconds, press [3, 4] to set the
starting time.
3
Press [OK].
4
Set the finishing time by repeating steps 2 and
3.
∫ To activate the timer
5
Press [PLAY, F] repeatedly to set the desired
play timer on.
6
Press [Í] to turn the unit off.
Check the settings Press [CLOCK/TIMER] twice.
(When the unit is (The setting is displayed.)
on or in standby
mode)
Cancel Press [PLAY, F] twice to clear the timer
indicator from the display.
12
≥ The timer will start at the preset time, with the volume increasing gradually to
The sleep timer can turn the unit off after a set time.
1
2
≥ The play timer and sleep timer can be used together. The sleep timer always
≥ When "AUTO OFF" is "ON" and the unit is left unused for about 30 minutes,
Listening to audio from
iPod or iPhone
∫ Inserting an iPod/iPhone
1
2
3
above).
4
5
6
∫ Removing an iPod/iPhone
1 Repeat step 1 and 3 (
2 To remove, simply pull the iPod/iPhone straight out.
3 Repeat step 5 and 6 (
≥ If the iPod/iPhone dock is not tilted when connecting or disconnecting the
≥ Be sure to use a dock adapter that is compatible with your iPod/iPhone.
≥ Reduce the volume of the main unit to minimum before connecting or
the preset level.
Sleep timer
Press [SLEEP] to turn the sleep function on or
off.
30MIN # 60MIN # 90MIN # 120MIN
^--------------- OFF (Cancel) (------------}
Press [SLEEP] once to check the remaining
time.
has the priority. Be sure not to overlap the timer settings.
the unit will shut down even if the play time or sleep time has not expired.
Inserting/Removing an iPod/
iPhone
Open the sliding door. (
Insert the suitable dock adapter (not supplied)
for the iPod/iPhone.
≥ Insert the side of the iPod/iPhone dock adapter with the
clips facing towards you first and then push the opposite
side until it clicks into place.
A Clips
B Dock adapter
C iPod/iPhone docking
switch lever
D Connector
Press [<] to unlock the
iPod/iPhone dock and then
pull the docking switch
lever to tilt the iPod/iPhone
dock.
Connect the iPod/iPhone
(not supplied) firmly.
≥ Be sure to remove the iPod/iPhone from its case.
Push the docking switch
lever back until it clicks into
place.
Close the sliding door. (
above).
above).
iPod/iPhone, it may cause damage to the connector.
To purchase a dock adapter, consult your iPod/iPhone dealer.
disconnecting the iPod/iPhone.
9)
Click!
Click!
9)