Basic Play; Program Play; Repeat Play - Panasonic SC-HC35 Operating Instructions Manual

Basic play

1
Press [Í] to turn the unit on.
2
Insert the disc to be played (
3
Press [CD].
4
Press [1/;] to start play.
Stop Press [∫].
Pause Press [1/;]. Press again to resume play.
Skip Press [:] or [9] to skip track.
Press [3, 4] to skip album. (MP3)
Search [CD] Press and hold [6] or [5].
Direct access [CD]: Press the numeric buttons to select
play the track.
(Play starts from
[MP3]:
the track you 1 Press [3, 4] to select the album.
selected.) 2 Press [9] once and then the
≥
View contents Press [DISPLAY] repeatedly during play
information or pause.
The current track's information, etc. is
displayed.
≥ Maximum number of displayable characters:
≥ This unit supports ver. 1.0, 1.1 and 2.3 ID3 tags.

Repeat play

After performing steps 1-3 in "Basic play"
1
Press [PLAY MENU] repeatedly to select
"REPEAT".
2
Press [2, 1] to select "ON REPEAT" and press
[OK].
3
Press [1/;] to start play.
≥ To stop repeat play, select "OFF REPEAT" in step 2.
10
9).
numeric buttons to select the track.
This function does not work during
random play or program play.
approximately 30
Text data that is not supported will not be
displayed or shown differently.
Play mode function
After performing steps 1-3 in "Basic play"
1
Press [PLAY MENU] repeatedly to select "PLAY
MODE".
2
Press [2, 1] to select the following mode and
press [OK].
1-TRACK : Plays one selected track on the disc.
1TR
1-ALBUM : Plays one selected album on the disc.
1ALBUM
≥ Press [3, 4] to select the album.
[MP3]
RANDOM : Plays a disc randomly.
RND
1-ALBUM
RANDOM : Plays all tracks in one selected album
1ALBUM RND
randomly.
[MP3]
≥ Press [3, 4] to select the album.
3
Press [1/;] to start play.
≥ During random play, you cannot skip to the previous track.
≥ The current play mode is cleared when you open the sliding door.
≥ To repeat program play or selected play mode, select "ON REPEAT" in PLAY
MENU.

Program play

Enables you to program up to 24 tracks.
After performing steps 1-3 in "Basic play"
1
Press [PROGRAM] during the stop mode.
2
[CD]:
Press the numeric buttons to select the track.
≥ To program more tracks, continue by pressing the
numeric buttons.
[MP3]:
1 Press [3, 4] to select the album.
2 Press [9] once and then the numeric buttons to
select the track.
3 Press [OK].
To program more tracks, repeat steps 1 - 3.
3
Press [1/;] to start play.
Cancel programme Press [PROGRAM] in the stop mode to
mode clear "PGM" indicator from the display.
Check programme Press [:] or [9] when "PGM" is
contents displayed in the stop mode.
Delete last Press [DEL] in the stop mode.
programmed track
Clear all 1 Press [∫] in the stop mode.
programmed 2 Press [∫] again while blinking
tracks "CLR ALL".
≥ The program memory is cleared when you open the sliding door.