Sanyo LCD-32XR10F Instruction Manual page 12

Connecting an HDMI device
HDMI cable
Connecting a component video device
12
Component cables often have red, green, and blue color-coded
video connectors and red and white audio connectors. Match the
colors when making connections.
Connecting a computer
TV REAR
Connections
TV REAR
HDMI device
TV REAR
Component video device
Component
Audio cable
video cable
To monitor port
(15-pin D-Sub)
D-Sub cable
Audio cable
(Continued)
How to connect an HDMI device:
Connect the HDMI cable between the HDMI jack on the TV and
HDMI output jack on the device.
Note: If your device has an HDMI connection, we recommend you
use that to get the best quality possible.
To play from the HDMI device:
1. Turn on your TV, then press SOURCE button. The Input
Source menu opens.
2. Press 5 or6 to select HDMI1 or HDMI2 or HDMI3
correspondingly, then press OK to confirm.
3. Turn on the HDMI device and set it to the correct mode.
Refer to the instructions that came with the HDMI device.
Note:
If the external device has DVI output only, use a DVI to HDMI
adapter cable to connect to the HDMI terminal. Connect the audio
cable to the PC IN AUDIO jack on the TV rear.
To connect a component video device:
Connect the Component Video cable between the Y, Cb/Pb, Cr/Pr input
jacks on the TV and Y, Cb/Pb, Cr/Pr output jacks on the device .
Connect the Audio cable between the AUDIO input jacks on the TV and
AUDIO output jacks on the device.
To play from the component video device:
1. Turn on your TV, then press SOURCE button. The Input
Source menu opens.
2. Press 5 or6
then press OK to confirm.
3. Turn on your external device and set it to the correct
mode. See the device's user guide for more information.
To connect a computer:
Connect a VGA cable between the VGA jack on the computer and the
VGA input jack on the unit.
Connect an Audio cable between the AUDIO output on the computer
and AUDIO input jack on the unit.
To play video from the computer:
1. Turn on your TV,
2. Press 5
3. Turn on your computer, and adjust the display
To audio output jack
to select Component 1 or Component 2,
then press SOURCE
button. The Input Source menu opens.
or 6
to select D-SUB, then press
OK to confirm.
properties as required.