Setting Up - Sanyo LCD-32XR10F Instruction Manual

Selecting a location
Installing remote control Batteries
Aiming the remote control
5m

Setting Up

You should select a location for the TV:
Where direct light does not reflect on the screen.
·
That has indirect and soft lighting.
·
Where the TV has access to an antenna or cable TV connection.
·
Where the TV has access to a power outlet.
·
Note: Watching TV in total darkness or with a reflection on the screen
may cause eyestrain.
To install remote control batteries:
1
Open the battery cover.
2
Insert two AAA batteries into the battery compartment. Make sure
that the + and – symbols on the batteries match the + and – symbols
in the battery compartment.
3
Replace the cover.
Battery precautions:
Improper use of batteries can result in a leakage of chemicals and/or
explosion. Be sure to follow the instructions below.
·
Place batteries with their terminals corresponding to the (+) and (–)
indications.
·
Different types of batteries have different characteristics. Do not mix
batteries of different types.
·
Do not mix old and new batteries. Mixing old and new batteries can
shorten the life of new batteries and/or cause old batteries to leak
chemicals.
·
Remove batteries as soon as they are non-operable. Chemicals that leak
from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.
·
Dispose of batteries in a proper manner.
·
If the remote control is not used for an extended period of time, remove
the batteries.
·
The batteries shall not be exposed to excessive heat such as sunshine, fire
or the like.
Use the remote control by pointing it towards the remote sensor on the
front of your TV. Objects between the remote control and the remote
sensor may prevent proper operation.
Cautions regarding use of remote control
· Do not expose the remote control to shock. In addition, do not expose the
remote control to liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat
·
may cause deformation of the unit.
· The remote control may not work properly if the remote sensor window
of the main unit is under direct sunlight or strong lighting. In such a case,
change the angle of the lighting or the TV set, or operate the remote control
closer to the remote sensor window.
9