Panasonic PV-DV102 Operating Instructions Manual page 73

Palmcorder USB Device Driver/SD Drive
For Windows 2000 users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CONNECT WITH PC" appears in the EVF or the LCD monitor.
• The "Found New Hardware" screen of Windows is displayed.
• When the Palmcorder and PC (with Windows 2000) are connected via USB, a
message, such as the one below, is displayed.
The following message is displayed. However, testing by the manufacturer
has confirmed functionality of this palmcorder with Windows XP/2000.
Click [Yes] and proceed.
Note
• For extended use, the AC Adaptor should be used as a power source.
For Windows 98SE/Me users
3
Connect the Palmcorder to your PC (Windows) using the USB Cable (supplied).
• "CONNECT WITH PC" appears in the EVF or the LCD monitor.
Note
• For extended use, the AC Adaptor should be used as a power source.
DV102.p 72-74.p65 73
73
02/03/05, 12:59