Troubleshooting - Sanyo DMP-P7 Instruction Manual

Symptom
Unit doesn't respond AC cord isn't plugged into a wall
(no power)
outlet.
Wall outlet is not functioning
iPod does not dock
Using no or wrong iPod insert
properly
iPod didn't install properly
iPod is not installed properly
iPod does not
respond to the unit
Your iPod software is too old
iPod is locked up
Using 1 or 2
other devices.

Troubleshooting

Possible Problem
st nd
generation iPod,
Plug the AC cord into a wall outlet.
Plug another device into the same outlet to confirm the
outlet is working
Make sure the dock insert is the proper fit for your
iPod
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Remove your iPod from the dock and check for
obstruction on the connectors in the dock and on your
iPod. Then reseat it in the dock.
Upgrade software on your iPod. For details visit
http://www.apple.com/ipod/download
Please make sure your iPod is working properly
before docking into the unit. Please refer to your iPod
manual for details.
Clock radio
cannot control those iPods or other
devices.
13
Solution