Table of Contents
Advertisement
Choosing The Correct Adaptor
When connecting an iPod / iPhone to this iPod Dock, please ensure that
the correct adaptor plate is used. FAILURE TO DO SO MAY RESULT IN
DAMAGE TO THE iPod / iPhone.
The iPod dock comes with 6 removable dock adaptors. Using the correct adaptor
ensures the proper fit for your iPod / iPhone and helps to reduce the stress on the
connector when operating the iPod / iPhone.
To place a dock adaptor:
1. Refer to the compatibility table below and select the
correct dock adaptor for the iPod / iPhone.
2. Place the proper adaptor into the dock and press it into
position. The adaptor will only go in one way. The iPod
dock connector should fit through the opening in the
bottom of the adaptor.
3. Carefully align and then gently insert the iPod / iPhone
into the dock.(The iPod/iPhone must not be in a case or
"SKIN")
4. To remove/replace a dock adaptor, first remove the
iPod/iPhone, then grip the adaptor and pull gently upwards.
Charging your iPod / iPhone
Note: Please make sure you are using the correct insert
that it is properly docked into this unit.
FAILURE TO DO SO MAY DAMAGE THE iPod / iPhone.
When an iPod / iPhone is inserted into the dock, it will go to standby mode then turn
off. While the iPod / iPhone is docked in the system, it will recharge (until fully
charged). Please note that older 3rd generation iPod cannot be charged by this unit.
NOTE: In order to avoid interfering with the reception, the iPod / iPhone will not be
charged in the TUNER mode(FM / AM).
iPod/iPhone OPERATION
22
from your iPod / iPhone
and
Advertisement
Table of Contents
