Table of Contents
Advertisement
Basic Playback
Tuner Operation
The following buttons are used in tuner mode. Press [
mode.
AM/FM
Press to switch between AM mode and FM mode.
MO/ST
Press to switch between Mono and Stereo
signal
MEMORY
After tuning in a new frequency, press [MEMORY], then select a preferred
station by inputting the corresponding numbers to save it as a preset station.
AUTO
Press to do auto scanning for the broadcasting radio
can store 40 stations for the AM broadcasting and 40 stations for the FM
broadcasting .
During auto scanning, press to stop the process.
The digit keys can be used to select a preset station.
1 1
2 2
3 3
4 4
5 5
6 6
For example, press[0] and [2] to select channel 2; press [1] and [5] to select
7 7
8 8
9 9
9 9
channel 15.
0/10
0/10
10+
10+
SEARCH+/-
Press to fine tune the frequency of the current station.
RADIO+/-
Press skip to the next/previous preset station.
NOTE:
In tuner mode, [VOLUME+/-], [CH-LEVEL], [MUTE], [TONE] and [S.EFFECT]
buttons are available. For details, please refer to the remote control introduction in
this chapter.
For better FM reception,change the position of FM antenna wire.
For better AM reception,adjust the position of AM external aerial loop
in FM mode.
FUNCTION
reception of the broadcast
-22-
] to select tuner
channels.The unit
.
Hide quick links:
Advertisement
Table of Contents
