Using Sound Effects; Avoid Interfering; Connecting To A Portable Audio Equipment; Using Other Equipment - Panasonic SC-AK270 Operating Instructions Manual

Using sound effects

Changing the sound quality: Preset EQ Changing the sound quality: Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY SOFT CLEAR
FLAT (off)
Setting Effect
HEAVY Adds punch to rock
SOFT For background music
CLEAR Clarifi es higher frequencies
VOCAL Adds gloss to vocal
DISCO Produces sound with the same kind of lengthy
reverberations heard at a disco
LIVE Makes vocals more alive
HALL Adds an expansiveness to the sound to produce
the atmosphere of a great concert hall
FLAT No effect
Changing the sound quality: Changing the sound quality:
Manual EQ Manual EQ
1
Press [MANUAL EQ] repeatedly to select your desired
setting.
BASS MID
Setting Effect
BASS For lower pitch sound
MID For middle pitch sound
TREBLE For higher pitch sound
2
Press [4, / REW ] or [¢,
OR
By main unit only
Setting the BASS;
Turn [BASS CONTROL] to either increase (+) or decrease (–) the
pitch.
Note:
• The level of the pitch is between -3 to +3.
• The changes you make are stored and automatically recalled the
next time you select "MANUAL EQ".
Changing the sound quality: Changing the sound quality:
RE-MASTER RE-MASTER
Press [RE-MASTER] repeatedly to select either "RE-MASTER
ON" or "RE-MASTER OFF".
Enjoying the bass: D.BASS Enjoying the bass: D.BASS
Press [D.BASS] repeatedly to select either "D.BASS ON" or
"D.BASS OFF".
VOCAL DISCO
HALL LIVE
TREBLE
/ FF] to adjust the level.

Using other equipment

Note:
All peripheral components and cables are sold separately.
Avoid interfering with other Panasonic Avoid interfering with other Panasonic
equipment equipment
Other Panasonic audio or video equipment may start functioning
when you operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote
control operating mode to "REMOTE 2".
The main unit and remote control must be set to the same
mode.
1
Press and hold [MUSIC PORT] on the main unit and [2]
on the remote control until the main unit's display shows
"REMOTE 2".
2
Press and hold [ENTER] and [2] on the remote control for
at least 2 seconds.
To change the mode back to "REMOTE 1", repeat both steps above
by replacing [2] with [1].

Connecting to a portable audio equipment

Connecting to a portable audio equipment
This feature enables you to enjoy music from a portable audio
equipment.
Playing or recording from a portable audio
equipment
Switch off the equaliser function (if there is any) of the portable
audio equipment before you plug into the MUSIC PORT jack.
Otherwise, sound from the speaker may be distorted.
1
Plug the audio cord into the MUSIC PORT jack.
2
Press [MUSIC PORT] repeatedly until "MUSIC PORT" is
displayed.
For listening : Proceed to step 3.
For recording : Press [¶ REC, TAPE] on the main unit to start
recording.
3
Play the portable audio equipment. (See the portable audio
equipment's instruction manual.)
Portable audio equipment
(not included)
Audio cord
(not included)
15
RQT8043