Sound Effects - Panasonic SC-PM270 Owner's Manual

Improving the sound quality
1
Press [PLAY MENU] repeatedly to select "FM MODE".
2
Press [R, T] to select "MONO" and then press [OK].
To cancel, select "STEREO".
"MONO" is also canceled when you change the frequency.
To memorize the setting
Continue with step 4 of "Manual presetting" (
Checking the signal status
Press [DISPLAY].
FM – – – – The FM signal is weak.
The system is not tuned in to a station.
FM ST The FM signal is in stereo.
FM MONO "MONO" is selected as the "FM MODE". The FM signal is in monaural.
FM allocation setting
This system can also receive FM broadcasts allocated in 0.1 MHz steps.
1
Press [RADIO].
2
Press and hold [SELECTOR] on the main unit.
After a few seconds, the display panel shows the current minimum radio frequency. Release the button
when the minimum frequency changes.
• To go back to the initial setting, do the above steps again.
• Preset frequencies are erased after you change the setting.

Sound effects

1
Press [SOUND] repeatedly to select the sound effect.
2
Press [R, T] to select the setting and then press [OK].
PRESET EQ
BASS
TREBLE
D.BASS
SURROUND
18
"HEAVY" (default), "SOFT", "CLEAR", "VOCAL" or "FLAT"
–4 to +4 (default: 0)
Using the main unit
1. Press [BASS].
2. Press [2/3] or [5/6].
–4 to +4 (default: 0)
Using the main unit
1. Press [TREBLE].
2. Press [2/3] or [5/6].
"ON D.BASS" (default) or "OFF D.BASS"
"ON SURROUND" or "OFF SURROUND" (default)
17).