Maintenance; When Moving The Unit - Panasonic SC-AK270 Operating Instructions Manual

Troubleshooting guide (continued)
■ Listening to the radio
Distorted sound or noise is
heard.
The stereo indicator fl ickers or
does not light.
A beat sound is heard.
A low hum is heard during AM
broadcast.
■ Disc trays
Disc tray(s) cannot open.
"CHGR ERR" is displayed.
Memory reset (Initialisation)
When the following situations occur, refer to the instructions below to reset the memory:
• There is no response when buttons are pressed.
• You want to clear and reset the memory contents.
To reset memory
1 Disconnect the AC mains lead. (Wait at least 3 minutes before proceeding to step 2)
2 While pressing and holding down [y/I] on the main unit, reconnect the AC mains lead.
"– – – – – – – – –" appears on the display.
3 Release [y/I].
All the settings are returned to the factory preset.
You will need to reset the memory items.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this unit.
• Before using chemically treated cloth, read the instructions that
came with the cloth carefully.

When moving the unit

1
Remove all discs.
2
Press [y/I] to turn the unit off.
3
Disconnect the AC mains lead.
18
RQT8043
• Use an outdoor antenna.
• Turn the television off or move it away from the unit.
• Separate the antenna from other cables and cords.
• Press [y/I] to release the jammed tray(s) as the unit will switch off. Turn it on again and the
tray(s) will initialise to the previous tray(s) condition.
• If this still does not fi x the problem, please consult the dealer.
For a cleaner crisper sound (cassette deck)
Clean the heads regularly to assure good quality playback and
recording. Use a cleaning tape (not included).
Page
5
—
—
—
—