Table of Contents
Advertisement
Note
•
The screen will change as following when the motion picture button is pressed in steps
A Still picture recording
¢1
screen
B Motion Picture Mode
¢2
setting
C Motion picture
recording screen
D Still Picture Mode
setting
¢1 Touch [
] to display the available recording time before recording motion pictures.
¢2 The screen that is displayed during Motion Picture Mode setting is different depending on the
[REC MODE]
setting of the
•
Refer to
P120
for the [MOTION PICTURE] Mode menu.
•
The flash setting is fixed to [Œ].
•
Refer to
P194
for information about the available recording time.
•
The available recording time displayed on the screen may not decrease regularly.
•
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
•
The operational sound of the zoom or button operation may be recorded when it is operated
during the recording of a motion picture.
•
The screen may be blacked out momentarily, or the unit may record noise due to static
electricity or electromagnetic waves etc. depending on the environment of the motion picture
recording.
•
When operating the zoom in recording motion pictures, it may take time to come into focus.
•
If the Extra Optical Zoom was used before pressing the motion picture button, recordable area
will be changed drastically since these settings are cancelled.
•
Even if the aspect ratio setting is the same in still and motion pictures, the angle of view may
change at the start of the motion picture recording.
When [
REC AREA]
displayed.
•
[STABILIZER] is fixed to [MODE1] in recording motion pictures.
•
In recording motion pictures, the following functions cannot be used.
–
[
], [
], [
] in the AF mode
ƒ
Ù
(It will switch to [
Ø
–
Direction Detection function
–
Extra Optical Zoom
–
[FACE RECOG.]
–
[ISO LIMIT SET]
•
It is recommended to use a fully charged battery or AC adaptor (optional) when recording
motion pictures.
•
If while recording motion pictures using the AC adaptor (optional) and the power supply is cut
off due to a power outage or if the AC adaptor (optional) is disconnected etc., the motion picture
being recorded will not be recorded.
•
Zoom speed may be slower than normal in recording motion pictures.
Advanced (Recording pictures)
7 7
Q Q
.
(P27)
is set to [ON], angle of view during motion picture recording is
].)
0 0
- 86 -
3
4
and
.
R1m21s
R1m21s
R1m21s
C C
3 3
Hide quick links:
Advertisement
Table of Contents
