[Text Stamp] - Panasonic Lumix DMC-FX70 Operating Instructions Manual

You can stamp the recording date/time, name, location, travel date or title onto the
recorded pictures.
It is suitable for regular size printing. (Pictures with a Picture Size larger than [
resized when stamping the date etc. on them.)
Select [TEXT STAMP] on the [PLAYBACK] Mode menu.
Touch [SINGLE] or [MULTI].
Select an image you wish to
stamp with text.
•
['] appears on screen if the picture is
stamped with text.
[SINGLE] setting
1
Drag the screen horizontally
and select an image.
2
Touch [SET].
•
You can forward or rewind pictures
continuously by keeping your finger on
the left or right sides of the screen after
forwarding/rewinding a picture.
(Pictures are displayed reduced in
size.)
[MULTI] setting
1 Touch a picture to select
(repeat)
•
Switch the screen by touching [3]/[4]
if these are displayed on the slide bar.
•
Selection will be cancelled by touching
the same picture again.
2
Touch [OK].
Advanced (Playback)

[TEXT STAMP]

[SINGLE]
- 135 -
] will be
(P23)
[MULTI]