Panasonic Lumix DMC-FX70 Operating Instructions Manual page 66

Note
•
When setting Auto Bracket, [
•
When taking pictures using Auto Bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range. Exposure value is
displayed in the touch icon at the top right of the screen when the exposure is compensated.
•
The Auto Bracket setting is cancelled if you turn the camera off or [SLEEP MODE] is activated.
•
When Auto Bracket is set, the Auto Review function is activated regardless of the Auto Review
setting. You cannot set the Auto Review function in the [SETUP] menu.
•
The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
•
[Œ] is set for the flash when Auto Bracket is set.
•
Burst is cancelled when Auto Bracket is set.
•
Setting of the Auto Bracket cannot be performed in following conditions.
–
In [TRANSFORM], [PANORAMA ASSIST], [HI-SPEED BURST], [FLASH BURST],
[STARRY SKY], [PIN HOLE], [FILM GRAIN] and [PHOTO FRAME] in Scene Mode
–
When recording motion pictures
Advanced (Recording pictures)
] appears on the screen.
- 66 -